This guide provides step-by-step instructions to flash Jetson Linux 32.7.5 onto the EagleBoard’s EMMC, including downloading necessary files, entering force recovery mode, and executing the flashing process. It also covers partitioning and mounting the /home and /var directories on the EagleBoard for optimal storage configuration.

1. Steps to flash Jetson Linux 32.7.5 (latest) (Jetpack 4.6.5 DP) on EagleBoard EMMC:

**Board spec: https://tannatechbiz.com/nvidia-jetson-nano-developer-kit-b01.html**

(Note: You can also use https://developer.nvidia.com/sdk-manager to confirm it.)

File 1: Driver Package BSP

File 2: Sample Root FS

File 3: tegra210-p3448-0002-p3449-0000-b00.dtb

• Once it is confirmed that it is in force recovery mode, use the steps provided below to

flash the image into the EMMC.

• Download File 1 & File 2 from : https://developer.nvidia.com/embedded/linux-tegra-r3275
• Download File 3 form: https://drive.google.com/file/d/1vd2TleSPh8SxgAKAZABFSNPYdEnsSxhO/view?usp=sharing

Do the following operations:

1. Make sure the device is powered off
2. Jump the pins 9 and 10 (RST and GND) with the jumper
3. Plug in the micro-USB cable with the board and to the host machine firmly.
4. The board will start to boot into force recovery mode.
5. Confirm that the board is in force recovery mode by issuing the command lsusb on

the host machine.

1. The Jetson module is in Force Recovery mode if you see this message: